螺旋型金屬軟管 Screw Type Metal Flexible Hoses

採用薄壁不鏽鋼帶縱向焊接,然後滾壓成形，其外形波紋為螺旋狀，經固熔化處理後，抗腐性極好，一般適用於中低壓力，變位量較小，變位周期緩慢的配管系統中。 To use thin wall stainless steel band and to weld longltudlnally and then roll and press to shape, the bellows assume screw type (right:photo). After treatment, It possesses excellent cor-rosion resisting power. Generally, this kind of product is appli-cable in the pipi system of low and medlum pressure. small variation and of slow cycle in varation.

回產品頁

產品規格介紹

螺旋型軟管 Spiral Flexible Hose

Normal 口徑		Dlmenslon(mm) 尺寸				Bend Radlus(mm) 彎曲半徑		Welght(Kg/m) 重量(公斤/米)		Max Working presure (kg/cm²) 最大承壓
inch	mm	ID 內徑	OD 外徑	T 板厚	P 節距	Minimum Static Bend	Repeated 反複	Unbraided 裸管	Single Braid 附網	Max Working presure (kg/cm²) 最大承壓
1/4	8	7.1	11.5	0.25	3	20	115	0.12	0.25	107
3/8	10	10.5	15	0.25	3	20	115	0.17	0.32	86
1/2	15	14.2	17.9	0.30	3.3	20	115	0.26	0.45	72
3/4	20	20	25.5	0.30	4.1	25	145	0.32	0.57	57
1	25	26	32.8	0.30	4.4	27	155	0.46	0.70	43
1 1/4	32	32.5	41	0.30	5	35	200	0.60	0.95	36
1 1/2	40	38.5	47.6	0.30	6	40	235	0.85	1.43	29
2	50	51.5	61.5	0.40	6.5	50	300	1.25	2.05	23
2 1/2	65	63.5	75.5	0.40	7.8	55	300	1.50	2.55	23
3	80	76	88.5	0.40	10.2	65	360	2.30	3.75	17
4	100	103	116	0.40	10.7	80	470	2.95	4.47	15